Road Rescue Type 3 

ULTRAMEDICTM AMBULANCES

Engineered to a higher standard

plus-blue

You count on your team to deliver exceptional pre-hospital care. In turn, they can count on the enduring performance of Road Rescue UltraMedic Type 3 ambulances. With inspired engineering and ergonomically-designed environments, our vehicles fully support your team, so they can confidently conquer even the most challenging missions.

  • Road Rescue ambulances are built with CNC Plasma and Laser Cutters, VHB tape and robotic welding for repeatable results, rock-solid precision and quicker lead times.
  • REV Group’s support and advanced engineering practices back each unit, starting with construction in an ISO 9001:2015 certified factory.
  • Each Road Rescue comes equipped with top-of-the-line features inside the patient area, like antimicrobial cabinetry interiors, all wrapped in a safety-focused structure.

Chassis

plus-square-white
line-white
plus-white
line-white
plus-square-white

Reliability on the scene is as important to EMTs and fire crews as it is to the workers building each Road Rescue UltraMedic Type 3 ambulance. Decades of trust and performance are delivered time and time again on either a Ford or Chevrolet ambulance chassis.

Chevrolet CG33503
Chevrolet CG33503
Chevrolet G4500
Chevrolet G4500
Ford E-450
Ford E-450
Ford F-450
Ford F-450

Modules

plus-square-blue
line-blue
plus-blue
line-blue
plus-square-blue

Road Rescue’s UltraMedic Type 3 ambulances are street tough rebels, each riding on a Ford or Chevy cutaway chassis. From upgraded aesthetic choices that double as extra protection, to features only found on a Road Rescue, these emergency vehicles are prepared for every scenario.

Brilliance™ Advanced Vehicle Lighting

With Brilliance Advanced Vehicle Lighting, every element has been seamlessly engineered to bring safety to light. Our lighting is designed as an integral part of the Road Rescue experience. Brilliance delivers a striking, illuminating appearance with an aspiring level of safety on the road.

module-plus

CurveForce™ Formed Corners

Road Rescue’s signature, formed aluminum body corners utilize proprietary engineering that produces an exceptionally strong corner structure with a clean, smooth, continuous radius. Requiring only one welded seam at each corner reduces corrosion potential while creating a distinctive, well-rounded appearance that commands attention.

CurveForce™ Formed Corners

Road Rescue’s signature, formed aluminum body corners utilize proprietary engineering that produces an exceptionally strong corner structure with a clean, smooth, continuous radius. Requiring only one welded seam at each corner reduces corrosion potential while creating a distinctive, well-rounded appearance that commands attention.

module-plus

Rub Rail Fendering

Rubber rail fendering comes standard—just another touch Road Rescue adds to its fleet. Superior to C-channel rails, these rubber rails run as one smooth continuous transition over the fender, providing aesthetic appeal, as well as an area to add reflective inserts.

TypeIII-fender
module-plus

CrewGuard™ Body

We engineer the CrewGuard Body with CurveForce™ formed aluminum corners and our exclusive ladder design frame for increased strength, durability and safety. The Road Rescue CrewGuard Body rises to the challenge at every turn.

CrewGuard™ Body

We engineer the CrewGuard Body with CurveForce™ formed aluminum corners and our exclusive ladder design frame for increased strength, durability and safety. The Road Rescue CrewGuard Body rises to the challenge at every turn.

Standards

When it comes to Road Rescue UltraMedic emergency vehicles, a long list of high-end features is the standard. Equipped with industry-best features and built using high-quality materials and construction techniques, these ambulances are street tough—inside and out.

Body

Body

  • Adhesive: VHB tape is used to attach extrusions to the skin
  • Body: One-piece .125″ aluminum pan formed wall panels
  • Subfloor: Ladder frame with sound deadening undercoating
  • Body: Underbody expanding spray foam insulation
  • Construction: 3/4″ plug welds and robotic welding
  • Construction: CNC plasma laser cutting
  • Sides and corners: Formed extrusions are folded over at the sides and welded together
  • Sill plates: 1″x3″ solid aluminum secured to chassis frame rails
Compartments

Compartments

  • Attendant seat: 3-point seatbelt
  • Cabinets and floor: All aluminum interior resists fluid-borne pathogens
  • Patient area: Spacious aluminum interior
  • Squad bench: 16″ A-bar with anti-microbial coating
  • Upholstery: Seamless
Cabinets/Countertops

Cabinets/Countertops

  • Cabinets: Anti-microbial, thermal plastic laminate
  • Countertops: Scratch-resistant Avonite
  • Restocking cabinets: Two gas-assist shocks hold the door open
  • Shelving: Adjustable interior and exterior cabinets
Doors

Doors

  • Door frames: Extruded, reinforced stainless-steel door panels on entry doors
  • Handles: TriMark handles with anti-slip material on backside of paddle
  • Grab rails: L-bar grab handles on side and rear entrance doors
  • Hinges: Exclusive HiddenHinges™ design protects from environmental conditions
  • Hinges: 3M polyurethane tape added to both sides of the hinge to prevent electrolysis
Electrical systems

Electrical systems

  • Attendant lights: Surface-mounted LED edge lit
  • Circuit board: 12-volt
  • Dome light: Momentary switch illuminates for 15 minutes
  • Interior lights: White LED light strip in ceiling medical device rail with brake and turn at the rear 12″
  • Lights: Shadow-less, highest lumen count in the industry
  • Shoreline: 115-volt AC, 15-amp inlet with mating plug and GFI protection
  • System: Weldon V-MUX multiplex electrical system with touch screen display and joystick controller
Emergency alerts

Emergency alerts

  • Brake and turn signal lights: Rear ceiling medical device rail, LED red and amber
  • Grille lights: Two Whelen micron super LED
  • Intersection lights: Located on front fender
  • Rear-view camera: OEM with monitor
  • Siren: Whelen WS-295SLSA1
  • Speakers: Two 100-watt drivers

Environmental

Environmental

  • A/C-system: Optional Cool Bar auxiliary A/C condenser
  • Insulation: 1″ dowel dense foam topped with 5/16″ e-foil
  • Insulation: 3M Thinsulate in the cab headliner and on compartments and wheel wells
  • Insulation: Sound deadening, used in the subfloor
  • Seams: Sealed for superior protection from external elements
Safety

Safety

  • Crash-rail: Snap-on, extruded rail, eliminates fasteners
  • Grab bars: Anti-microbial
  • Subfloor: .500″ solid aluminum plating welded to subfloor and full-length tube structure

Options

plus-square-white
line-white
plus-white
line-white
plus-square-white

Road Rescue’s ER-inspired illuminating engineering, ergonomic design, advanced safety and premium customization mean every ambulance is ready to conquer the most challenging conditions. With options in lighting, included medical equipment and even the paint choice, you can create one exceptional tool for your crew.

Specifications

plus-square-white
line-white
plus-white
line-white
plus-square-white
Model Length Width Headroom Int. Storage Ext. Storage
Type III 157” 96″ 72″ 190.77 cu. ft. 76.63 cu. ft.
plus-icon-whiteoutline

Road Rescue,
In Service for Life™

Let the Road Rescue team help answer your questions about our revolutionary lineup
of emergency vehicles. Just submit your details and we’ll reach out to you shortly.